Differences

This shows you the differences between two versions of the page.

--- signal_generator [2024/05/10 12:31] – created admin
+++ signal_generator [2024/05/10 12:48] (current) – [MCU Requirements] admin
@@ Line 2: / Line 2: @@
 An RF vector signal generator specializes in creating RF signals with analog and digital modulation schemes in formats such as QAM, QPSK, FSK, BPSK, and OFDM. Vector signal generators are commonly used for receiver sensitivity testing. The digital signal generator generates a baseband signal, which is then modulated in amplitude and phase to make the final modulated signal. You can find VSGs in the telecommunications industry, where they play a critical role in testing and evaluating modern communication systems and devices.
-===== Modulation =====
+===== Modulation Stage =====
-{{:pasted:20240510-130012.png}}
+<WRAP center round box 100%>
+{{:ideas:vsg:20240510-130012.png}}
+</WRAP>
-===== DAC & Waveform generator =====
-{{:pasted:20240510-130226.png}}
-{{:pasted:20240510-130302.png}}
-===== Clocks =====
-{{:pasted:20240510-130957.png}}
-===== MCU Parametrics  =====
+===== DAC & Waveform Generator Stage =====
+<WRAP center round box 100%>
+{{:ideas:vsg:20240510-130226.png}}
+{{:ideas:vsg:20240510-130302.png}}
+</WRAP>
+===== Clocks Generation Stage =====
+<WRAP center round box 100%>
+{{:ideas:vsg:20240510-130957.png}}
+</WRAP>
+===== MCU Requirements =====
+<WRAP center round info 60%>
   * CPU Type			32-bit RISC MCU
   * Speed			Min. 40 MHz
@@ Line 21: / Line 31: @@
   * Required peripheries:	SPI, I2C, UART, USB
   * Pin Count			Min. 28
+</WRAP>