GKun Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Vector Signal Generator - 100MHz..2.4GHz ======
An RF vector signal generator specializes in creating RF signals with analog and digital modulation schemes in formats such as QAM, QPSK, FSK, BPSK, and OFDM. Vector signal generators are commonly used for receiver sensitivity testing. The digital signal generator generates a baseband signal, which is then modulated in amplitude and phase to make the final modulated signal. You can find VSGs in the telecommunications industry, where they play a critical role in testing and evaluating modern communication systems and devices.

===== Modulation Stage =====
<WRAP center round box 100%>
{{:ideas:vsg:20240510-130012.png}}
</WRAP>



===== DAC & Waveform Generator Stage =====
<WRAP center round box 100%>
{{:ideas:vsg:20240510-130226.png}}
{{:ideas:vsg:20240510-130302.png}}

</WRAP>

===== Clocks Generation Stage =====
<WRAP center round box 100%>
{{:ideas:vsg:20240510-130957.png}}
</WRAP>

===== MCU Requirements =====
<WRAP center round info 60%>
  * CPU Type			32-bit RISC MCU
  * Speed			Min. 40 MHz
  * Program Memory Size		Min. 64 kB
  * SRAM			Min. 16 kB
  * Temp. Range			-40..105 degC
  * Operation Voltage		2.3..3.6 V
  * Required peripheries:	SPI, I2C, UART, USB
  * Pin Count			Min. 28
</WRAP>